Got the car back from the service. Only downer was they had removed the driver's side half door (fair enough) but had pulled the riveted popper base out of the aluminium panel in the process. I riveted it back on when I got home but need to get some rivet washers to hold it tight. Steve Grubb (Grubbster) is kindly going to send me some.
I've attached the print out of my car setup that Caterham gave me. You can see that they didn't get the weights completely evenly balanced - I expect that its very difficult given the driver location. They did have to add a hell of a lot of lead! [although I don't know how much - outstanding question with Caterham].
One thing the sheet doesn't say is that camber on the fronts is approximately 2 degrees negative.
Posted by charles at February 26, 2004 7:00 AM